Nanjing Yu Ding Electronics Co., Ltd. Contact: Wang 18913951307 QQ: 1641195904 http://www.025ykt.com Our crane remote control in harsh environment can use three to four years, imported from Europe rocker, use life of more than 4 million times, the use of PC and PA housing material, impact resistance, waterproof, dustproof, stop using the Japanese system of international standards and key switch, use the computer to set Preferences (function type); launched within Tibetan antenna, easily broken by external force, multiple digital protection, anti-jamming, to prevent malfunction, bodypack joystick, good linearity, Duanluofenming, away from the hazardous work area operation, ergonomic, adapt long operation use. 1. climbing day car, please be careful of their own safety. Always turn off the crane before installation total power supply to avoid electric shock 3. The receiver of the location of the installation must be considered regardless of which corner crane walking, are not part of the conflict and prominent buildings. 4. The receiver must be locked when installed, it may cause the receiver loose, fall. 5. The installation should be checked before the crane safety equipment and crane is in normal working condition. 6. should really understand the power distribution and remote control crane function setting status (with relay output), avoid causing incorrect wiring. 7. The receiver must be installed away from the drive position, at least 3 meters away from the motor and connection cable (as shown below), in order to avoid the undue interference receiver. 8. The receiver can not be installed in electrical control box, the right of way is to install the receiver is fixed to the top of the electrical control box (or outside) the appropriate location, then the receiver output cables into the electrical control box to make appropriate wiring. LY